SPECIFICATIONS:

Electrically Heated, Continuous Strip-Annealing Unit with
an Angular Hearth and Water Quench Tank, Includes a
Recoiler and a Built-In Dissociator

Heat Zone: 8" Wide x 3" High x 108" Long
Coolant Quench Tank: 22" Wide x 20" High, 48" Long

Combination Unit Width: 36"
Length of Unit, Including Quench Tank, Approx.: 22'
Height of Unit: 48"

Single Muffle Design:

1/4" Thick Diamond Shape Muffle
9" Wide x 3" High Work Space at the Muffle Center
Muffle is of all TIG Welded Deisgn and Extends
Through the Furnace Entrance
Sealed Atmosphere Box
Extends Through the Furnace Exit and Enters the
Water Quench Tank

Kilowatt Rating of Furnace: 220/60/3,
80 Line Amps +/- 20%

Furance Direction: Left to Right

EQUIPPED WITH:

Temeperature Control:

There are two Watlow microprocessor-based
auto-tuning controls for heating up to approximately
1500 degrees F. This divides the heat zone into two
zones. Each zone is monitored for oven temperature
by two Watlow over-temperature limit controls. All
controls are calibrated for type (K) thermocouples.

Cooling Quench Tank:

Stainless steel material. There is a 4" diameter
polymer drum for guiding the strip stock through
the water tank.

Panel Board

Drive System:

The drive system consists of a pair of rubber pinch
rolls with soft rubber, geared for speeds up to
144 inches per minute. There is a "V" groove bearing
assembly adjustable to 8" wide to guide strip into
the pinch rolls

Recoiler:

14" diamter x 9" wide collapsible drum

Bass Machinery
2100 Hendon St Toledo OH 43606-4543
Tel: 419-243-2277 Fax: 330-299-0520
Email (Request Quote): sales@bassmachinery.com
Web: www.bassmachinery.com